I've read in the engine manual that they suggest to glue the sprocket on the hub with 5 min epoxy.
The thing is, the sprocket sits on the base of the spokes, I thought the surface wasn't big enough to have a nice epoxy bond.
So i cut away a ring of fabric (It's actually a fake Shamwow that some guy sold me in the street, i'm such an ass to have bought that) that i soaked with epoxy.
I used NU-LUSTRE-55 instead, same epoxy but dries in 24h :)
On the sprocket side, i carved little lines with my Dremel to have even better bond.
Once soaked, the ring of fake shamwow thickness is almost nothing so the alignment with the chain won't change.
Then I bolted the backplates and the whole assembly seems very strong !
No comments:
Post a Comment